Viewing the twin¶
Navigate to Digital Twin → 3D Twin. The page shows the site in 3D, with a menu beside it.
The site¶
The 3D view shows the ground, the buildings, the outdoor areas and the equipment outside buildings or on roofs. Each building and outdoor area carries a name label with a count of its machines by status.
The menu beside the 3D view lists the same things, so you can browse the site without the 3D view:
- Buildings — each building with its floors and, if it has any, its roof equipment
- Outdoor areas — each area with the equipment in it
- On site ground — equipment standing on the open ground
Use the search box at the top of the menu to find a building, an area or a piece of equipment by name.
To give the 3D view more room, click the minimise button at the top of the menu. The menu folds to a thin strip beside the 3D view (on a phone, a bar above it); click the strip's button to bring it back. The menu stays minimised the next time you open the page in this browser. A long menu scrolls.
Selecting things¶
Click a building, an outdoor area or a piece of equipment — in the 3D view or in the menu — to select it. A card in the corner of the 3D view shows its name and offers the next step:
| Selected | Card shows |
|---|---|
| A building | Enter building |
| An outdoor area | Show area — the view moves to the area |
| A linked machine | Its status, and Machine Details to open the machine's page |
| Equipment that is not linked | Not linked to a machine (not shown for towers, overhead lines and racks, which often aren't machines) |
Double-clicking a building or an outdoor area goes straight into it.
To go back, use Exit building / Back to site, or click the site's name in the breadcrumb at the top.
Buildings and floors¶
Inside a building, its floors are listed in the menu. Click a floor to open it.
The floor view shows one floor on its own: the floor outline with faint walls, any zones marked on the floor (production lines, cells, areas, aisles) with their names, and the equipment standing on it. The menu lists the building's other floors and the machines on this floor.
From the floor view:
- Click a machine (in 3D or in the menu) to select it and see its status. Machine Details opens the machine's page.
- Switch to another floor of the same building from the menu.
- Exit building takes you back to the site.
A link to a floor with a machine selected can be shared: opening it goes straight to that machine.
Live status¶
Linked machines show their live status as a coloured light — on a CNC machine, the matching lamp of the stack light on its roof lights up (green running, amber idling, red offline or in alarm). Building and area labels count their machines by status.
| Status | Meaning |
|---|---|
| Running | The machine is working |
| Idling | Powered but not producing |
| Offline | The machine isn't reporting |
| Alarm | The machine is in alarm |
| Hub offline | The hub the machine reports through has stopped sending data, so its status is out of date |
| No rules added | The machine has no status rules set up yet |
Status is worked out the same way as on the machine pages, so the twin and the machine list always agree.
When machines on the floor you're looking at have a hub that stopped reporting, a banner says how many — their status is out of date until the hub reports again.
When the 3D view isn't available¶
Some browsers or devices can't show 3D graphics. The page then says "3D view not available"; use the menu to browse the site and open machines instead.