Skip to content

Building the site

Engineering access required

Everything on this page needs engineering access with Engineering Mode switched on. Other users only see the finished layout.

Starting a layout

When your organisation has no layout yet, the 3D Twin page offers these ways to start:

Choice What you get
Start from a template A ready-made layout to change as you like (see below)
Start from plant model A site filled from your plant model: one building per area, with its machines set out in rows by line. The machines are already linked. Shown only when your organisation has a plant model
Start blank An empty site that you draw yourself

Whichever you choose, you can change everything afterwards.

You don't need a plant model to build a twin — equipment can be placed first and linked to machines later.

Templates

Template What it contains
Single factory hall One production hall with a CNC line, an assembly line, a robot cell, stores and a utility corner, a site cabin, and a fenced yard with a gate, a road, parking, a lawn and trees
Factory campus A production hall, a warehouse with solar panels on its roof, a two-storey office and a container office; a utility yard with compressors, a substation with transformers and reactors, a solar block, small wind turbines and a sewage treatment plant; with roads, street lights, parking, EV chargers, a gate cabin, a gate and a fence
Multi-storey building One four-storey building — assembly, machining, final assembly and a utilities floor — with plant and solar panels on the roof, a road, parking and a lawn
STP / utility plant A sewage treatment plant with a control room, a container for the pump drives, a substation and a treated-water pond, inside a fence with a gate
Solar farm Four solar blocks of panel rows with inverters and combiner boxes, a substation with its outgoing overhead line, a control room, and a fenced access road with a gate
Wind farm Six wind turbines and a met mast with access roads, a substation, its outgoing overhead line and a control room
IT park Two six-storey office towers, a data centre with server racks, precision air conditioning and UPS, a food court with solar panels on its roof, a utility yard with DG sets, chillers and cooling towers, a substation and a sewage treatment plant; with a road, street lights, parking, EV chargers, a security cabin, a gate and a fence
University campus An academic block and two hostels with solar panels on their roofs, a library, a laboratory block with fume hoods, an administration block and a canteen; a utility yard, a substation and a sewage treatment plant; with roads, a lawn, parking, EV chargers, a security cabin, a gate and a fence
All shapes Every equipment shape and site object once, grouped by kind: indoor equipment in one hall, outdoor equipment in areas beside it, a cabin and two containers with equipment inside, an overhead line, and a row with each site object. Useful for seeing what each one looks like before you build your own site

Pick one, choose where it goes under Plot, and click Use this template:

  • Fit the plot to the template (the starting choice) — the plot is made just big enough for the template, with 10 m to spare all round.
  • Keep the plot — the plot keeps its size and the template is placed in the middle of it. If the template is too big for it, the plot grows just enough to hold it.

When a template has several buildings of one kind they are numbered — "Office tower 1", "Office tower 2". Each card shows how many buildings, outdoor areas and pieces of equipment it adds.

Every building in a template comes with its typical doors, roller shutters and windows (see Doors and windows below). Its floors are fitted out too (see Editing floors):

  • Factory halls and warehouses: a walkway, aisle lines with direction arrows, a crossing, hazard tape, keep-clear hatching and forklift bays. The single hall also has a shift office cabin.
  • Offices and IT towers: meeting rooms, cabins, washrooms and a pantry, with desk clusters and a reception desk.
  • University: classrooms with desks and a board, a staff office, labs with island benches, library shelving and reading tables, offices in the administration block, and hostel floors of two-bed rooms with a washroom and a common pantry.
  • Data centre and canteens: a wall with a double door between the data hall and the power room, and dining tables with a servery counter.

Everything a template adds is ordinary layout: open Edit site or Edit layout to rename, move, resize or delete any of it. Its equipment is not linked to machines yet — rename it after the machine it stands for, or delete what you don't have.

A location that is still empty — for example one you have just added with Add location — shows Use a template next to Edit site, so you can fill it from a template too.

Setup checklist

While a twin is still being set up, a Set up your 3D twin checklist sits above the site menu. Each step ticks itself as the layout fills in:

Step Done when
Draw the ground and buildings The site has at least one building or outdoor area
Place equipment At least one piece of equipment is placed, on a floor, outdoors or on a roof
Link equipment to machines Every piece of equipment is linked to its real machine — the step shows how many are linked so far. Transmission towers, overhead lines and storage racks are left out: they are often not machines, so they don't need linking (you can still link one)
Link to the plant model (optional) A building or outdoor area is linked to your plant model. Shown only when your organisation has a plant model
Enable the 3D twin The 3D twin is enabled, so every user can see it

The next step to do is highlighted, with a button where one helps: Edit site, Open the first floor to place equipment on, or Enable.

Close the checklist with × if you don't need it; Setup (n left) next to Edit site brings it back. Your browser remembers this for each location. Once every step except the optional one is done, the checklist goes away by itself.

Adding another location

For a second place that belongs to the same organisation — a remote solar farm or a pumping station — click Add location at the top of the page, enter a name, pick its Type (Factory, Solar farm, Wind farm, Utility plant or Mixed) and confirm. Each location has its own layout; switch between them with the site selector.

Deleting a whole layout

To start again from scratch, open the site (not a building or an area) and click Delete layout. The confirmation lists what will go: the location with all its buildings, floors, zones, outdoor areas and equipment.

  • Your machines and their data are not affected. Links between machines and 3D equipment are removed, so if you build a new layout you need to link them again.
  • This cannot be undone.
  • If it was your only location, the page shows the start choices again, so you can pick a template, start from plant model or start blank. If you have other locations, the page moves to one of them.

Editing the site

On the site (with no building or area opened), click Edit site. The menu on the left becomes the editing palette. It scrolls, each section folds when you click its name, and the minimise button at its top folds the whole palette to a strip:

  • Buildings & areas — Add building, Add cabin, Add 20 ft container, Add 40 ft container and Add outdoor area
  • Site objects — solar arrays, roads, parking, gates, fences, walls, lawns, gravel, paving, rows of trees, street lights, ponds and pipe racks
  • Equipment — every type of equipment, grouped and searchable

A bar above the 3D view shows what to do next, the number of unsaved changes, the Ground, Plot and Grid settings, and the Undo, Redo, Discard changes, Save and Done buttons.

The ground

Ground sets what the open ground of the site looks like: Grass, Earth, Sand, Gravel, Concrete or Plain (a neutral grey). Automatic — the starting choice — picks one from the site's type: grass round a factory, a plant or a wind farm, bare earth under a solar farm; the list shows which one it picks. The change is saved with the layout and everyone sees it.

Substations and switchyards are always drawn on gravel. For a lawn, a gravel bed or a paved forecourt in one place, add a Lawn, Gravel or Paving site object (see below).

The plot

The faint rectangle on the ground is the site's plot — its boundary. It starts at the corner of the site and is drawn exactly to its size, so anything outside it shows as outside. A new location starts with a 300 m × 200 m plot.

Click Plot on the bar (it shows the current size) to change it:

  • Type a new Width and Depth in metres.
  • Fit to layout wraps the plot round everything on the site — buildings, outdoor areas, equipment, roads and fences — with 10 m to spare. If part of the layout lies outside the plot's corner, the whole layout is moved in first, everything together; the box tells you when this will happen.

Each change is one step you can undo, and is saved with the layout.

Adding a building

  1. Click Add building. A see-through building follows the pointer.
  2. Click on the ground where it should stand.

A new building is 30 m × 20 m with one Ground floor, 8 m high. Select it to change it in its card:

Field What it changes
Name The building's name
Size (m) Width and Depth, measured along the building's own sides. Equipment on the roof moves with the new size; equipment inside keeps its place, so check each floor after making a building smaller
Turn Turns the building a quarter turn (90°) to the left or right; the angle shows between the buttons. Its floors, the equipment inside it and on its roof turn with it
Floors Each floor's name and Height (m). Add floor on top adds a floor above the others; the bin icon removes a floor (a building always keeps one)
Roof Flat, Pitched or Single slope; for a sloped roof, its Slope (°) and whether the Ridge runs along the width or the depth
Doors and windows How many doors, roller shutters and windows it has; Add typical openings and Remove all (see below)
Colour The building's colour, or Default colour

Drag a building to move it. Its rooftop equipment, its doors and windows and everything inside it move with it.

Doors and windows

Add typical openings gives the building a usual set of doors, roller shutters, windows and louvres (ventilation grilles), worked out from its size and floors:

  • A hall (one floor 6 m high or more): roller shutters in both end walls — two in an end 20 m wide or more — with a door beside the first one, louvres high up near the corners, doors along the long walls about every 30 m, and a band of windows high along each long wall.
  • Any other building (offices, buildings with several floors, low buildings): windows about every 3 m on every floor, a glass entrance in the middle of the longest wall of the ground floor, and a door in the wall opposite.

Clicking it again replaces the building's doors and windows with a fresh set; Remove all takes them all away. Both can be undone. The doors and windows stay in place on their walls when you move, turn or resize the building; removing a floor removes the doors and windows on it.

Cabins and containers already have their own door and window, so they don't have these buttons. Buildings added from a template come with their typical doors and windows.

Adding one door or window

The Doors and windows list on the left has: Door, Double door, Roller shutter, Window, Window band (a long strip of windows), Glass front and Louvre.

  1. Click one. Move the pointer over a wall of a building: a see-through box shows where it will go, on the floor you are pointing at.
  2. Click to add it there. It comes at its usual size — a door 1 m × 2.1 m, a roller shutter 4 m × 4.5 m, a window 1.5 m × 1.2 m set 0.9 m above the floor, and so on.

Doors and windows go on ordinary buildings only, not on cabins or containers.

Changing a door or window

Click a door or window while editing to select it. Then:

  • Drag it along its wall. It can go round a corner onto another wall of the same building, but it stays on its floor. The arrow keys move it along its wall one grid step at a time (Shift: 2 m).
  • In its card:
Field What it changes
Type Door, roller shutter, window and so on; the new type comes at its usual size
Floor Which floor of the building it is on
Width (m) / Height (m) Its size
Above the floor (m) How high its bottom edge is above its floor (a window's sill)
From the left corner (m) Where its middle is along the wall, from the corner on the left as seen from outside
Hinges For a door: hinges on the left or the right, as seen from outside
Duplicate Adds a copy beside it on the same wall
Delete Removes it (or press Delete)

A door or window never goes past the end of its wall or above its floor's ceiling: one that is too big is shown as large as fits.

On a floor plan, each door shows how it swings open into the building.

Adding a cabin or a container

A site cabin or a shipping container is added as a small building, so you can place equipment inside it — a panel room, a control cabin, a container holding drives or a UPS — and enter it like any other building.

  1. Click Add cabin, Add 20 ft container or Add 40 ft container. The cabin or container follows the pointer.
  2. Click on the ground where it should stand.

It comes at its standard size with one floor — a cabin 6 m × 3 m, a 20 ft container 6.06 m × 2.44 m, a 40 ft container 12.19 m × 2.44 m — and is named "Cabin 1", "Container 1" and so on. Its card is the same as a building's, with what it is under its name, and:

  • No roof settings — a cabin or container has its own flat top.
  • For a container, Container size: 20 ft or 40 ft, and Standard height or High cube (the taller container). Changing the height sets every floor of the container.
  • Add floor on top stacks another cabin or container on it — for example a two-high container office.
  • Colour paints the container, or a cabin's roof and trim.

When you enter a cabin or container, its walls fade like any building's, and its floors open in the floor editor as usual.

Adding an outdoor area

  1. Click Add outdoor area.
  2. Click on the ground where it should be.

In the area's card, set its Name, its Type (for example Sewage treatment (STP), Effluent treatment (ETP), Switchyard, Substation, Tank farm, Utility yard, Solar block, Wind field or Other) and its Size (m). Equipment in the area spreads out or closes up when you resize it.

Drag an area to move it; its equipment moves with it.

Placing outdoor and rooftop equipment

  1. Pick a piece of equipment from the Equipment list (use the search box to find it).
  2. Click on the ground to place it — or on a building's roof to place it on that roof.

Equipment you place starts as not linked to a machine and is named after its type ("Transformer 1", "Transformer 2", …). Equipment on a roof turns with its building when the building is turned. Select it to link it to its machine, or to change its name, size, rotation and colour (see Editing a floor — the card is the same). Its card says when it stands on the roof of a building.

Linking works as on a floor (see Linking equipment to machines). The Equipment list here starts with the outdoor and rooftop equipment Not linked yet and the Machines not in the twin yet. Machines placed inside a building are linked from that floor's editor.

Drag equipment to move it. Rooftop equipment stays on its roof.

Overhead lines

An Overhead line (one span) is one span of a power line: a transmission tower at each end with the conductors and the earth wire hanging between them. Its Width is the span length and its Depth the width of the crossarms. To draw a longer line, place several spans end to end with the same rotation: put each next span's centre one span length further along, and the two spans share the tower where they meet. Use a Transmission tower on its own where a line ends or turns.

Adding site objects

Site objects are the things on a site that are not machines: rows of solar panels, roads, parking, the gate, fences and walls, lawns, gravel and paving, trees, street lights, ponds and pipe racks.

  1. Pick one from Site objects. It follows the pointer.
  2. Click on the ground where it should go. A Solar array can also go on a building's roof: click on the roof.

It is named after what it is ("Road 1", "Road 2", …). An object placed inside an outdoor area belongs to that area and moves with it. One on a roof moves and turns with its building.

Select an object (click it) to open its card:

Setting What it does
Name The object's name
Its size Depends on what it is — for a solar array the Rows, Panels per row, Tilt (°) and Height off the ground (m); for a road its Length and Width; for parking the Bays per row and Rows (one or two); for a gate its Width; for a fence or wall its Length and Height; for a lawn, gravel, paving or a pond its Width and Depth; for trees and street lights the Length of the row, the Spacing and the Height; for a pipe rack its Length, Height and number of Pipes
Rotation Turns it in 15° steps, or type the angle. A new road, fence, wall or row runs left to right: turn it 90° to run the other way
Duplicate Adds a copy next to it
Delete Removes it

Drag an object to move it, or use the arrow keys. R and Shift + R turn it.

A road, fence, wall or row with corners (for example a fence drawn all round the site) keeps its shape: you can move and turn it, but its length can't be typed. To build a fence round a site yourself, place one straight fence per side and leave a gap for the gate.

Deleting

Select a building, an area, a site object or a piece of equipment and click Delete in its card (or press Delete).

  • Deleting a building also removes the solar arrays on its roof, and deleting an outdoor area the site objects in it.

  • Deleting a building always asks first, and says how many floors and items will go with it.

  • Deleting an outdoor area, or removing a floor, asks first when there is equipment on it.

Nothing is removed until you save, and Undo brings it back.

The grid

The Grid setting on the editing bar sets the steps that positions snap to: Off, 0.25 m, 0.5 m (the start) or 1 m. Hold Alt while dragging to place something freely, off the grid. Your browser remembers the setting.

Keyboard shortcuts while editing

Keys What they do
Esc Stop placing / clear the selection
Delete Delete the selected item
R / Shift + R Rotate the selected equipment or site object
Arrow keys Nudge the selected item (Shift for bigger steps); a door or window moves along its wall
Alt (hold while dragging) Place freely, off the grid
Ctrl + Z / Ctrl + Y Undo / redo

While something is selected the arrow keys move it, not the view; W A S D still move the view. The other camera controls are on Getting around in 3D.

Saving

Click Save to save every change at once. Discard changes goes back to the last saved layout; Done leaves the editor.

  • If you leave the editor, or the page, with unsaved changes, Enture asks before discarding them.
  • If someone else saved the layout while you were editing, saving is refused and a message offers Reload. Reloading shows their version; your unsaved changes are lost.