Live¶
The Live page shows real-time readings streamed directly from your incomer energy meters. It updates continuously as new data arrives — no need to refresh. If your meters are not streaming, the page shows an empty state.
Each tile shows a small Wi-Fi indicator: green when that reading is live, grey when the stream is offline or stale.
Live Active Power¶
One tile per incomer, each showing:
- The machine (incomer) name
- The current active power reading in kW
- The incomer source type (EB, SOLAR, WIND, DG)
A Live / Offline badge in the section header reflects whether any incomer is currently streaming.
Click any tile to open a trend chart for that parameter, with quick ranges (1 h / 6 h / 24 h / 7 d).
Live Peak Demand¶
Tiles showing real-time peak demand grouped by source type. The platform sums all incomer machines of the same type into a single combined figure:
| Tile | What it shows |
|---|---|
| EB | Sum of current peak demand from all EB (grid) incomers |
| SOLAR | Sum of current peak demand from all solar incomers |
| WIND | Sum of current peak demand from all wind incomers |
| DG | Sum of current peak demand from all DG incomers |
The unit shown (kW or kVA) follows the setting configured in EMS Settings.
Live Power Factor¶
One tile per incomer showing the current power factor. Click a tile to open its trend chart. Power factor sustained below 0.9 may attract utility penalties — see the Power Quality page for historical analysis.
Tip
If tiles show Offline, check that the hub connected to your energy meters is online in the Digital Twin.