Skip to content

Plant Model — Browse Devices

Overview

Digital Twin → Plant Model → Browse shows your edge hubs, workspaces, devices and parameters as an interactive diagram. Start from your hubs and open only what you want to look at: hub → workspace → device → parameter.

It is a read-only monitoring view. Nothing here changes your configuration. Use the Devices | Processes | ISA95 switch at the top right to move to the Processes view or the ISA95 view.


Opening and Closing Boxes

  • Double-click a box to open it and see what is inside. Double-click it again to close it.
  • Or click the small › arrow on the right of a box.
  • The view moves to show the box you just opened. Drag the background to move around, and use the mouse wheel or the + / − buttons to zoom.
  • Click Close all at the top of the page to fold everything back to the hubs.

A box without an arrow has nothing inside it.


What Each Box Shows

Box Shows
Hub The hub name, whether it is Online or Offline right now, and how many workspaces it has.
Workspace The workspace name and how many devices it has.
Device The device name, its type in muted text under the name (Modbus, MQTT, S7, EtherNet/IP, BACnet, LSV2, Virtual), and how many parameters it has. Devices of every type are shown together under their workspace.
Parameter The parameter name, its latest value and unit, and its status. Click the small arrow-out icon on a parameter to open its full page.

A hub's status is the hub's own connection. It does not depend on its parameters.


Parameter Status

Parameters are only live while their device is open. Open a device to see its parameters and their status; close it and they stop updating.

Status Meaning
Online Data is arriving normally.
Stale No update for a few minutes. Some parameters report slowly, so this is not necessarily a problem.
Offline No update for more than five minutes.
No data The parameter has not reported anything.
Connecting Waiting for the first value.
Disabled The parameter is switched off and is not monitored.

Tip

To find a problem parameter, open the device you are interested in. Hubs show their own Online / Offline state without needing to be opened.